Alarm Monitoring System for security through radio channel

Alarm Monitoring System for security through radio channel

      The Alarm Monitoring System is realized in 19" metal box and allows working in case of a highly-muted radio channel. Alarm Monitoring System is compatible with the existing security transmitters on the market - TP2000, TM-4, MT150, MAT, ATS100, CK22, LBS2000, KEL780 and others.
Technical parameters of the Alarm Monitoring System for security through radio channel:

•   Output interface RS232 (standard) - 3 units;
•   Operational buffer of received messages – 1300 numbers;
•   Number of independent radio inputs - 4 (expandable up to 12 number of channels);
•   Interface RS232 working speed – up to 19200 bit/s;
•   Time needed for filtering the received messages - 2.5 minutes;
•   Built-in LCD 2x16 indication with night vision;
•   Management of sound signal 32dB in case of receiving an alarm event in autonomous mode;

•   Monitoring of the state of the radio channel ("quiet", "blocked", "white noise");
•   Built-in keyboard for the working dispatcher on duty.
•  Number of serviced objects 
  

   9999 (DSC-V1.3 and V1.4)
   8192 (KEEL)
   15 000 (LBO)
   32 0000 (C&K-Informer)
   7777 (LARS) and others;

•  Power supply - 12VDC;
•  Ability to store 32 000 000 alarm events on COMPACT FLASH DISK 512 MB;
•  Presence of built-in self-test;
•  Option for integrating a GSM communicator;
•  Types of working protocols through radio channel - LARS (KP), KEL780/781(EL), DSC (V1.3 and V1.4), LBS, C & K-INFORMER, LBO, KEEL 784, JKEEL and others.
•  Alarm Monitoring System is based on signal processor 180 MIPS-DSP;
•  Real-time monitoring of the parameters of input signals from the objects - number of words in the package, signal strength in dB, deviation, which channel did the alarm message come from, which repeater received the alarm message, and others;
•  Alarm Monitoring System allows work in an autonomous mode without PC or Central Station Monitoring Software;
•  Built-in engineering interface which displays full information for the received data signals, assisting when installing new objects;
•  Built-in audio control for all radio channels;
•  In Alarm Monitoring System are used the most advanced algorithms, allowing operation at low signal/noise ratio. The most modern protocols for operation with radio channel are used.;
•  Compatible with Central Station Monitoring Software -SIMSI, SIMSII, LARS Ver5.0, PowerLink Ver1.4 and Ver1.5, and others;
•  Alarm Monitoring System is compatible with other facilities for centralized security (digital security repeaters and others);