Back

Alarm transmitter LBS2000NV-150Mhz

                           Alarm Transmitter LBS 2000N

 

       The Alarm Transmitter LBS2000N is to be connected to the Alarm Panel and transmits occurred alarm messages via radio channel to the Central Monitoring Station.

       The LBS2000N units are a new generation of advanced, high performance, radio alarm transmitters. Manufactured using the latest SMD technology, the LBS2000N units are synthesized for both VHF and UHF frequencies.

       The LBS2000N unit transmits periodic test signals verifying its status and alerting the Central Monitoring Station of any service problems.

        Functional parameters of the Alarm Transmitter:

  •                  Programmable periodic test messages;
  •                  Synthesized VHF and UHF units;
  •                 The Alarm Transmitter is identified with two independent codes: subscriber’s number
  •      (address) and system number or subscriber’s unique code;
  •                 Opportunity of emitting an alarm message through 8 operating frequencies;
  •                  Мore than one transmitter can be working on one single radiofrequency;
  •                  Serial port for on-site parameter programming by PC using dedicated utility software;
  •                 Opportunity of re-programming the alarm transmitter’s all operating parameters;
  •                  The transmitter can operate on four chosen programmable addresses;
  •                  Interfaces with any alarm panel for transfer of up to 256 different messages;
  •                  Protection in case of reversing the power supply;
  •                 Circular (energy independent) buffer of 250 alarm messages in the alarm transmitter;
  •                  Opportunity for co-operation with GSM module;
  •                  Compact and easy to install;

 Inputs of the Alarm Transmitter LBS2000N

  •                  Number of inputs – from 1 to 9 possible;
  •                  Each input can be effortlessly preprogrammed – reaction time (sensitivity) from 100mS
  •                   to 25S step 100mS;
  •                  Opportunity of supervising the battery’s condition – the messages for low and charged
  •                   battery are at intervals of 4.5 minutes. Low batteries can now be detected and replaced
  •                   before discharging, ensuring constant security monitoring and efficient maintenance;
  •                   Inputs for serial communication with the Alarm Panel – Data and Clock via which a
  •                   constant monitoring of all occurred alarm situations in the guarded object is being
  •                   executed;
  •                   Opportunity of programming every alarm input to emit on selected frequencies and in
  •                   selected frequency sequence;
  •                  Specialized input for monitoring the alternating voltage;
  •                  Opportunity for every input to be separately and independently programmed – reaction
  •                  time, input level, number of emissions  in case of alarm signal, number of words in the
  •                  emission, etc.;

 Programming the parameters of the Alarm Transmitter LBS200N

  •                 Opportunity for easy programming of the alarm transmitter’s address and system;
  •                 Opportunity for programming of the following parameters – number of words in the
  •                  package, alarm message’s number of transmissions, number of transmissions of the test
  •                  signal, periodicity of test signal’s transmission from 1 to 48 hours with accuracy within 1
  •                  minute, sequence of  the operating frequencies;
  •                 Specialized program for programming the transmitter (Windows 95/98/XP/2K);

 Technical parameters of the Alarm Transmitter:

  •                 General Power Supply- DC Input 10-15 VDC, 10mA standby,1 A max during transmission;
  •                 Operating Temperature- -30°C  to 60°C;
  •                 Storage Temperature- -40°C  to 70°C;
  •                 RF Transmitter frequency-model LBS2000NV 136-174Mhz synthesized, model LBS2000NU Low 407-430Mhz, High 440-470Mhz;
  •                 Modulation- FFSK, PWM;
  •                  Power Output- model LBS2000NV-5W, model LBS2000NU-2.5W;
  •                  Frequency Stability- +-5ppm at -30°C to 60°C;
  •                  Spurious Emission--75dB below carrier min;
  •                  Output impedance- 50Ω, SO239 connector;
  •                  Digital Encoding- LARS,LARS1,KEL780,LBS,Informer,LBO,JKEL,JJKEL,CI,PPE;
  •                  Physical Dimensions Size- 30x80x149mm;
  •                  Weight-0.4kg;

            



Охранителен предавател LBS2000NV
Програмиране на охранителен предавател LBS2000NV